Abstract The oligochaete Dero lutzi follows a life strategy that alternates between free-living periods in aquatic environments and endoparasitic phases. Most occurrences of D. lutzi in anurans are reported in species with arboreal habits, with studies limited to the recording of the oligochaete’s presence in the host. Our study recovered specimens of D. lutzi from the tree frogs Scinax fuscovarius and Scinax. nasicus. We performed a morphological assessment of the parasite using light microscopy, for the first time, scanning electron microscopy. Molecular characterization of D. lutzi was carried out using the mitochondrial gene 16S rRNA and the nuclear gene 28S rRNA. Additionally, a phylogenetic tree was constructed to assess the species´position in relation to other group members. In our results, we confirmed the phenotypic morphological characteristics of the endoparasitic phase of D. lutzi. We also presented its phylogenetic position with other oligochaetes in the group, demonstrating the proximity between the endoparasite D. lutzi and the free-living oligochaete D. superterrenus.

Resumo O oligoqueta Dero lutzi possui uma estratégia de vida que alterna entre períodos de vida livre em ambientes aquáticos e fases endoparasitárias. A maioria das ocorrências de D. lutzi em anfíbios anuros é relatada em espécies com hábitos arborícolas, com estudos que se restringem a registros da presença do oligoqueta no hospedeiro. Este estudo recuperou espécimes de D. lutzi das pererecas Scinax fuscovarius e Scinax nasicus. Foi realizada uma avaliação morfológica do parasito por microscopia de luz e, pela primeira vez, por microscopia eletrônica de varredura. A caracterização molecular de D. lutzi foi realizada com o gene mitocondrial 16S rRNA e o gene nuclear 28S rRNA. Além disso, uma árvore filogenética foi construída para avaliar a posição da espécie em relação a outros membros do grupo. Os resultados deste estudo confirmaram as características morfológicas fenotípicas da fase endoparasitária de D. lutzi. Também foi apresentada sua posição filogenética com outros oligoquetas do grupo, o que permitiu demonstrar a proximidade entre o endoparasito D. lutzi e o oligoqueta de vida livre D. superterrenus.

Abstract: This study aimed to compare the use of connective tissue grafts (CTG) and platelet-rich fibrin (PRF) associated with the tunnel technique (TT) for the treatment of multiple gingival recessions (GR). Fourteen patients with multiple bilateral GR [type 1 recession (RT 1)] in the maxillary incisors, canines, and/or premolars were included. The TT was performed on both sides (split-mouth model); CTG (36 GR) was used on one side, and on the other, PRF (36 GR) was used. Clinical parameters, including recession depth (RD), probing depth, clinical attachment level (CAL), and keratinized gingiva thickness/width (GT/KTW), were obtained at baseline and after 1, 3, 6, and 16 months. Lower RD (0.81 ± 0.68 vs. 1.23 ± 0.71 mm) and CAL (2.54 ± 0.63 vs. 2.73 ± 0.82 mm) were observed for CTG compared to PRF after 16 months. Higher GT was obtained for CTG compared to PRF after 3 (1.81 ± 0.56 vs 1.43 ± 0.47 mm) and 6 months (1.67 ± 0.61 vs. 1.38 ± 0.55 mm, p < 0.05). The recession coverage (RC) was higher for CTG (55.42% ± 37.14) in comparison to PRF (29.53% ± 34.08) after 16 months (p < 0.05). Similarly, CTG presented a more complete coverage of the recession (15; 41.66%) than PRF (9; 24.32%). There were no significant differences between the groups in terms of surgery time, postoperative pain, or healing patterns. Greater esthetic satisfaction was obtained with CTG. It was concluded that CTG combined with TT showed clinical and esthetic results superior to those of PRF in multiple GR treatments.

Abstract This study aimed to investigate whether two acquisition parameters, voxel size and filter thickness, used in a micro-computed tomography (micro-CT) scan, together with the examiner’s experience, influence the outcome of bone repair analysis in an experimental model. Bone defects were created in rat tibiae and scanned using two voxel sizes of 6- or 12-µm and two aluminum filter thickness of 0.5- or 1-mm. Then, bone volume fraction (BV/TV) and trabecular thickness (Tb.Th) were analyzed twice by two groups of operators: experienced and inexperienced examiners. For BV/TV, no significant differences were found between scanning voxel sizes of 6 and 12 µm for the experienced examiners; however, for the inexperienced examiners, the analysis performed using a 12-µm voxel size resulted in higher BV/TV values (32.4 and 32.9) than those acquired using a 6-µm voxel size (25.4 and 24.8) (p < 0.05). For Tb.Th, no significant differences between the analyses performed by experienced and inexperienced groups were observed when using the 6-µm voxel size. However, inexperienced examiners’ analysis revealed higher Tb.Th values when using the 12-µm voxel size compared with 6 µm (0.05 vs. 0.03, p < 0.05). Filter thickness had no influence on the results of any group. In conclusion, voxel size and operator experience affected the measured Tb.Th and BV/TV of a region with new bone formation. Operator experience in micro-CT analysis is more critical for BV/TV than for Tb.Th, whereas voxel size significantly affects Tb.Th evaluation. Operators in the initial phases of research training should be calibrated for bone assessments.

Aim To discuss important topics regarding the dental procedures performed in patients before, during and after the radiotherapy treatment. The biological effects of ionizing radiation on bone tissue focusing on clinical care will be described. The invasive and not invasive procedures after radiotherapy treatment in the head and neck region will be addressed using scientific evidences to determine the appropriate moment for tooth extractions, periodontal management, and preventive procedures for osteoradionecrosis. Methods Thirty-three studies including original studies and reviews were selected in MEDLINE database (PubMed). No year of publication restriction was applied. Language was restricted to the English, and the following Medical Subject Heading terms were used: radiotherapy, osteoradionecrosis, dental management. Studies of osteoradionecrosis involving clinical management of irradiated patients, with an emphasis on updated guidelines and protocols were selected. Results Care in dental procedures were related about restorative treatment, endodontic treatment, rehabilitation for edentulous regions using prostheses and implants and periodontal procedures before, during and after RTX treatment. Conclusions The dental procedures should and can be performed before, during but also after radiotherapy. However, the clinical procedures should be less invasive as possible. A maintenance plan that reduces the necessity for major and more invasive treatments after radiotherapy is recommended.

Abstract The aim of this scoping review was to provide sufficient information about the effectiveness of ozone gas in virus inactivation of surfaces and objects under different environmental conditions. The review was performed according to the list of PRISMA SrC recommendations and the JBI Manual for Evidence Synthesis for Scoping Reviews. The review was registered in Open Science Framework (OSF). EMBASE (Ovid), Lilacs, LIVIVO, MEDLINE (PubMed), SciELO, Scopus and Web of Science were primary sources, and “gray literature” was searched in OpenGray and OpenThesis. A study was included if it reported primary data on the effect of ozone gas application for vehicle-borne and airborne virus inactivation. No language or publication date restriction was applied. The search was conduct on July 1, 2020. A total of 16,120 studies were screened, and after exclusion of noneligible studies, fifteen studies fulfilled all selection criteria. Application of ozone gas varied in terms of concentration, ozone exposure period and the devices used to generate ozone gas. Twelve studies showed positive results for inactivation of different virus types, including bacteriophages, SARS-CoV-2 surrogates and other vehicle-borne viruses. Most of the studies were classified as unclear regarding sponsorship status. Although most of the population has not yet been vaccinated against COVID-19, disinfection of environments, surfaces, and objects is an essential prevention strategy to control the spread of this disease. The results of this Scoping Review demonstrate that ozone gas is promising for viral disinfection of surfaces.

Abstract This systematic review evaluated the potential utility of platelet-rich fibrin (PRF) in bone repair in animals. The question is: can the use of PRF in bone defects in healthy rats induce bone repair compared to clot? This systematic review was conducted in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (Prisma). The protocol was registered with Prospero (CRD [42020162319]). The literature search involved nine databases, including grey literature. All studies evaluated the bone defects created in rats filled with PRF and clots (control). Biomaterial evaluation was also performed in this study. The risk of bias was assessed using the Systematic Review Center for Laboratory Animal Experimentation (Syrcle) tool for animal studies. A meta-analysis of quantitative data was performed to estimate the effect of PRF on bone repair in rats. Heterogeneity among the studies was assessed using the I2 statistic. The literature search retrieved 685 studies, 10 of which fulfilled the eligibility criteria, and 4 were included in the quantitative assessment. Analysis of the risk of bias revealed that most studies had a high risk of bias in performance and detection. Meta-analysis yielded divergent results and the absence of a statistically significant effect: PRF with control (standardized mean difference 2.54, 95% confidence interval -0.80–5.89; p = 0.14). In general, study heterogeneity was high (I2 ≥ 75.0%). The quality of the studies that influenced the conclusion of the review was based on the PICO, the sources and form of the search, the study selection criteria, the form of evaluation of publication bias, the evaluation of the quality of the studies, and data extraction by two researchers. PRF did not provide significant benefits for bone repair, resulting in unpredictable effects.

Resumo Este estudo avaliou os efeitos do cimento de ionômero de vidro (GIC) e da resina composta fluida bulk fill (BFRC) usados como preenchimento da câmara pulpar; e o tipo de iluminação das turbinas de alta rotação na remoção dentinária após cavidades de acesso para retratamento endodôntico em dentes molares. Vinte molares superiores foram tratados endodonticamente. Dez dentes foram restaurados usando BFRC (Opus Bulk Fill Flow APS, FGM) para preencher a câmara pulpar e dentina coronária; e resina composta convencional (Opallis, FGM) para restaurar a camada de esmalte. Os outros dentes foram restaurados usando GIC (Maxion R, FGM) para preencher a câmara pulpar e resina composta (Opallis, FGM). As amostras foram divididas em dois grupos e os canais radiculares foram novamente acessados com turbina de alta-rotação com iluminação branca ou ultravioleta. Os dentes foram escaneados usando micro-CT antes e após o novo acesso ao canal radicular. O volume de dentina removida foi calculado e os dados foram analisados por ANOVA bidirecional e teste de Tukey (α=0,05). As regiões na coroa e na câmara pulpar que apresentaram dentina removida no acesso dos canais foram descritas por meio de distribuição por frequência. A reabertura do canal radicular com GIC resultou em menos paredes afetadas da câmara pulpar e menor volume de dentina removida no assoalho. Nenhum efeito foi observado nas paredes de dentina coronária considerando aos protocolos de preenchimento. A turbina de alta rotação com iluminação branca reduziu a remoção de dentina da câmara pulpar, independentemente do protocolo de restauração utilizado. O uso de turbina de alta rotação com iluminação branca e GIC para preencher a câmara pulpar reduziram a remoção de dentina do assoalho e afetaram menos paredes dentinárias.

Abstract This study evaluated the effect of the use of glass ionomer cement (GIC) and flowable bulk-fill resin composite (BFRC) for filling pulp chambers and the type of high-speed handpiece light used on dentin removal during access preparation for endodontic retreatment in molar teeth. Twenty maxillary molars were treated endodontically. BFRC (Opus Bulk Fill Flow APS, FGM) was used to fill the pulp chamber and replace coronal dentin (n = 10). In the remaining teeth, the pulp chamber was filled with GIC (Maxion R, FGM). Conventional resin composite (Opallis, FGM) was used to restore the enamel layer in all teeth. The samples in each group were divided into two subgroups, and the root canals were reaccessed using a handpiece with white or ultraviolet light. The teeth were scanned using micro-CT before and after root canal reaccess. The dentin volume removed was calculated and analyzed using 2-way analysis of variance and Tukey’s test (α = 0.05). The crown and pulp chamber locations with dentin removal are described using frequency distribution. During the access, fewer pulp chamber walls were affected and a lower volume of dentin was removed from the pulpal floor in the group restored with GIC than in the group restored with BFRC. No effect was observed on the coronal dentin walls with respect to the filling protocols and type of light used. For dentin removal from the pulp chamber, handpieces with white light performed better than those with ultraviolet light, irrespective of the filling protocol used. The use of GIC to fill the pulp chamber and use of white handpiece light reduced dentin removal from the pulpal floor and resulted in fewer affected dentin walls.

Resumo Com o objetivo de avaliar a microarquitetura óssea cortical e a morfologia dos osteons após irradiação, foram utilizados doze coelhos machos da Nova Zelândia. Os animais foram divididos: grupo controle (sem radiação-NIr); e 3 grupos irradiados, sacrificados após: 7 (Ir7d); 14 (Ir14d) e 21 (Ir21d) dias. Foi utilizada uma dose única de radiação de 30 Gy. A microtomografia computadorizada analisou a microarquitetura cortical: espessura cortical (CtTh), volume ósseo (BV), porosidade total (Ct.Po), porosidade intracortical (CtPo-cl), número de canal/ poro (Po.N), dimensão fractal (DF) e grau de anisotropia (Ct.DA). Após a varredura, a morfologia dos osteosn foi avaliada histologicamente por meio de: Área e perímetro do osteon (O.Ar; O.p) e dos canais de Havers (C.Ar; C.p). A análise microtomográfica foi realizada por ANOVA, seguida pelos testes de Tukey e Dunnet. As análises morfológicas do osteon foram realizadas por Kruskal-Wallis e testadas por Dunn. A espessura cortical foi diferente (p<0,010) entre os grupos controle e irradiados, com córtex mais espesso no Ir7d (1,15±0,09). A porosidade intracortical revelou diferenças significativas (p<0,001) entre os grupos irradiados e o controle, com menor valor para Ir7d (0,29±0,09). O volume ósseo foi menor no Ir14d em relação ao controle. Área e perímetro do osteon foi diferente (p<0,0001) entre o controle e Ir7d. Os canais haversianos também revelaram valores mais baixos (p<0,0001) em Ir7d (80.57±9.3; 31.63±6.5) em relação ao controle e demais grupos irradiados. A microarquitetura cortical é afetada pela radiação e os efeitos parecem ser dependentes do tempo, principalmente em relação à morfologia dos osteons nos dias iniciais. A estrutura cortical em Ir21d revelou semelhanças com o controle, sugerindo que a microarquitetura se assemelha à condição normal após um período.

Abstract Aiming to evaluate cortical bone microarchitecture and osteonal morphology after irradiation, twelve male New Zealand rabbits were used. The animals were divided: control group (no radiation-NIr); and 3 irradiated groups, sacrificed after: 7 (Ir7d); 14 (Ir14d) and 21 (Ir21d) days. A single radiation dose of 30 Gy was used. Computed microtomography analyzed the cortical microarchitecture: cortical thickness (CtTh), bone volume (BV), total porosity (Ct.Po), intracortical porosity (CtPo-cl), channel/pore number (Po.N), fractal dimension (FD) and degree of anisotropy (Ct.DA). After scan, osteonal morphology was histologically assessed by means: area and perimeter of the osteons (O.Ar; O.p) and of the Haversian canals (C.Ar; C.p). Microtomographic analysis were performed by ANOVA, followed by Tukey and Dunnet tests. Osteon morphology analyses were performed by Kruskal-Wallis, and test Dunn’s. Cortical thickness was significant difference (p<0.010) between the NIr and irradiated groups, with thicker cortex at Ir7d (1.15±0.09). The intracortical porosity revealed significant difference (p<0.001) between irradiated groups and NIr, with lower value for Ir7d (0.29±0.09). Bone volume was lower in Ir14d compared to control. Area and perimeter of the osteons were statistically different (p<0.0001) between NIr and Ir7d. Haversian canals also revealed lower values (p<0.0001) in Ir7d (80.57±9.3; 31.63±6.5) compared to NIr and irradiated groups. Cortical microarchitecture was affected by radiation, and the effects appear to be time-dependent, mostly regarding the osteons morphology at the initial days. Cortex structure in Ir21d revealed similarities to control suggesting that microarchitecture resembles normal condition after a period.

Abstract: Three-point bending test is the most common mechanical test used for quantifying the biomechanical quality of bone tissue and bone healing in small animals. However, there is a lack of standardization for evaluation of bone repair by cortical perforation. The aim of this study was to determine the influence of bone defect position in the proximal metaphysis of rat tibias during load application and different span configuration on the three-point bending test outcomes. Cortical defects with 1.6 mm diameter were created at a standardized location on the medial surface of 60 tibias of male Wistar rats. The animals were euthanized 7 days after surgery. Five specimens were used to create 3D models for finite element analysis using high-resolution micro-CT images. Two spans (6 and 10mm) and three positions of the bone defect in relation to the load application (upward, frontal and downward) were evaluated experimentally (n = 10) and in finite element analysis (n = 5). Maximum load (N) and stiffness (N/mm) were statistically analyzed with 2-way ANOVA and Tukey test (α = 0.05). The results demonstrated that span and orientation of the bone defect significantly influenced the fracture pattern, stress distribution and force versus displacement relation. Therefore, reliable outcome can be achieved creating the bone defect at 8 mm from the extremity of the proximal epiphysis; placing a 10 mm distance span and downward facing defect position to allow a better distribution of stress and more fracture patterns that reached the bone defect target area with less intra-group variability.

Abstract: The aim of this study was to investigate the effects of different post space irrigation protocols for removing residual filling material from dentin walls, by using microcomputed tomography (micro-CT), and the influence of these protocols on dentin microhardness. Bovine incisors (n = 35) were filled with the single-cone technique and MTA Fillapex (Angelus, Londrina, PR, Brazil). Post space preparation (PSP) was performed 7 days after filling, using the Odous Touch electrical system (Odous De Deus Ind. e Com., Belo Horizonte, MG, Brazil), followed by post space irrigation using manual irrigation, passive ultrasonic irrigation, or Easy Clean, together with 2.5% sodium hypochlorite (NaOCl), or with 2.5% NaOCl and 17% EDTA (NaOCl/EDTA). Micro-CT scans were performed at three time points. The residual filling material was evaluated at three levels: cervical, middle and apical. The Knoop test was measured with four indentations around the canal lumen at three dentin depths: X (100 μm), Y (200 μm) and Z (400 μm). Statistical analysis was performed using ANOVA (p < 0.05). The effects of the activation method (p < 0.001), and the root level (p = 0.013), as well as the interaction between the irrigant and the activation method (p = 0.041), led to different percentages of residual filling material. Lower amounts of residual filling material were observed at the cervical versus the middle and apical levels (p < 0.05). No significant differences were observed in dentin microhardness (p > 0.05). The best removal of the residual filling material was performed using the Easy Clean tip and NaOCl/EDTA, regardless of the activation methods.

Resumo A rápida progressão das lesões de cárie nos dentes molares permanentes de pacientes jovens, frequentemente resulta no tratamento endodôntico. Este ensaio clinico randomizado cego avaliou o efeito de dois cimentos endodônticos (Sealer 26 e AH Plus) na incidência de dor e reparo apical após tratamento endodôntico de dentes molares jovens e identificar fatores associados aos desfechos do tratamento. O tratamento endodôntico foi realizado por estudantes de graduação em dentes molares permanentes (n=69) de pacientes jovens (n=54) na Clínica de Extensão Endodôntica e Restauradora da Universidade Federal de Uberlândia, Brasil. Protaper Next foi usado e os dois cimentos foram distribuídos aleatoriamente nas amostras, as quais foram restauradas com resina composta direta. Dois desfechos clínicos primários - reparo apical e dor pós-operatória foram avaliados após 12 e 24 meses por operadores de forma cega. Análise longitudinal dos dados incluiu a descrição das taxas de incidência e modelo de regressão misto usando Equações de Estimativa Generalizadas (GEE). As incidências (%) do reparo apical e dos dentes assintomáticos foram respectivamente 90,5/89,3 e 96,8/90,0 nos períodos de 1 e 2 anos de acompanhamento. Ausência de reparo apical foi associada com pulpectomia insatisfatória (p=0,003) e condições periapicais (p=0,007), bem como sua interação (p=0,016). Nenhuma dessas variáveis independentes foi capaz de prever a ocorrência de dor nos períodos de acompanhamento. O tratamento endodôntico mostrou resultados satisfatórios após 2 anos. O prognóstico do reparo apical depende das condições iniciais. Nenhum efeito do cimento endodôntico foi observado. O tratamento endodôntico de molares jovens associado com restaurações em resina composta realizado por estudantes de graduação tem um papel relevante na redução do risco de perda do dente permanente.

Abstract The progression of caries in permanent molar teeth of young patients, frequently result in endodontic treatment. This randomized blinded clinical trial assessed the effect of two endodontic sealers (Sealer 26 and AH Plus) on the incidence of pain and apical repair after endodontic treatment of young molar teeth, and secondly identify factors associated with the outcomes. Endodontic treatment was performed by undergraduate students in molar teeth (n=69) of young patients (n=54) at the Endodontic and Restorative Public Extension Clinic Service. Protaper Next was used and the endodontic sealers were allocated which were restored with direct composite resin. Two primary clinical outcomes - apical repair and postoperative pain, were assessed after 12 and 24 months for blinded operators. Description of incidence rates and mixed-model regression using Generalized Estimation Equations (GEE). After 2 years 69 molar teeth of 54 patients were evaluated. No effect of the endodontic sealer was observed irrespective of period of evaluation. Apical repair incidences and asymptomatic teeth were, respectively, 90.5 and 89.3, 96.8 and 90.0% during 1 and 2 years of follow-up. Failed apical repair was associated with unsatisfactory pulpectomy (p=0.003) and periapical conditions (p=0.007) as well as their interaction (p=0.016). None of these independent variables was able to predict the occurrence of pain in both periods. Prognosis of apical repair is dependent on the initial conditions. Endodontic treatment of young molars associated with composite resin restorations performed by undergraduate students have satisfactory results after 2 years and was effective to prevent the risk of permanent teeth loss.

Resumo Lesões de luxação lateral são uma das lesões periodontais mais graves no traumatismo dental. O diagnóstico seguido do reposicionamento do dente na posição correta é fundamental para o reparo do ligamento periodontal. Este estudo relata um caso clínico de luxação lateral do incisivo central superior envolvendo um novo software de reconstrução (e-Vol DX) por tomografia computadorizada de feixe cônico (TCFC) para confirmar a luxação lateral após nenhuma definição de lesão por trauma dental conclusivo pelo exame convencional. A lesão de luxação lateral foi reduzida digitalmente pela inserção do dente de volta ao seu alvéolo e, na mesma sessão, o dente foi estabilizado com uma contenção rígida e posteriormente trocada para uma contenção de nylon semirrígida. Durante o monitoramento da condição pulpar, foi diagnosticada necrose da polpa e, em seguida, o canal radicular foi tratado para evitar a reabsorção radicular. Procedimento externo de clareamento e restauração foi realizado. O acompanhamento de 4 anos e o novo exame de imagem e reconstrução digital não confirmaram reparo ósseo e nenhuma complicação. Imagens de TCFC analisadas pelo e-Vol DX podem ser utilizadas para determinar e orientar lesão de luxação lateral.

Abstract Lateral luxation injuries are one of the most severe periodontal injuries in dental trauma. The correct diagnosis followed by repositioning of the tooth on the right position is fundamental for the periodontal ligament healing. This study reported a clinical case of lateral luxation of maxillary central incisor involving a new cone beam computed tomography (CBCT) software for reconstruction (e-Vol DX) to confirm the lateral luxation after no conclusive dental trauma injury definition by using conventional exam. The lateral luxation injury was digitally reduced by insertion of tooth back to its alveolus, and at the same session, the tooth was stabilized with a rigid splint and further changed to a semi-rigid nylon splint. During the pulpal status monitoring, the pulp was diagnosed necrotic, then the root canal was treated to prevent root resorption. External office-bleaching and restorative procedure was performed. The 4-years follow up and new imaging exam and digital reconstruction confirmed bone healing and no complication. CBCT images analyzed by eVol DX can be used to determine and to guide lateral luxation treatment.

Resumo O objetivo deste estudo foi avaliar a presença de resíduos após o alívio do canal (AC) e verificar se o deslocamento apical da guta-percha foi afetado pelos momentos e métodos de AC em dentes obturados pela técnica do cone único. Os canais radiculares de 20 dentes incisivos bovinos foram instrumentados com Reciproc e obturados com cone único e AH Plus. As amostras foram divididas em 4 grupos de acordo com o momento e método de AC (n=5): broca imediato, termocompactador imediato, broca tardio e termocompactador tardio. Escaneamentos em micro-CT foram realizados antes e após o AC para análise dos resíduos da obturação (1) e do deslocamento apical (2). Os dados foram analisados empregando ANOVA em 2 fatores com medida repetida (1), ANOVA em dois fatores (2), seguidas do teste de Tukey (α=0,05). A porcentagem de resíduos remanescentes foi influenciada pelos métodos (p=0,044), momentos (p=0,006), pelo fator de repetição terços do canal (p<0,001), e pelas interações entre métodos e terços (p<0,001), e momentos e terços (p=0,044). Já para o deslocamento apical da obturação do canal radicular foi detectada influência significativa para os métodos (p=0,008), no entanto, nenhuma diferença foi encontrada entre os momentos (p=0,617). Em geral, AC usando brocas resultou em preparo mais homogêneo dos canais radiculares, principalmente quando realizado imediatamente após a obturação. Para todas as outras combinações entre métodos e momentos de AC, o terço médio e apical apresentaram significativamente maiores resíduos remanescentes. O método termo realizado nos dois momentos e o método broca de preparo realizado imediatamente resultaram em deslocamento na direção apical, representando a extrusão do material de obturação no canal radicular.

Abstract The purpose of this study was to evaluate the presence of residues after post space preparation (PSP) and establish whether the apical displacement of the gutta-percha was affected by the moments and methods of PSP in teeth filled by the single-cone technique. The root canals of 20 bovine incisor teeth were instrumented with Reciproc and filled with single-cone and AH Plus. The specimens were divided into 4 groups according to the moment and method of PSP (n=5): immediate with drill, immediate with thermoplasticizer, delayed with drill and delayed with thermoplasticizer. Micro-CT scans were performed before and after the PSP for residues of the root canal filling (1) and analysis of apical displacement (2). Data were analyzed by using 2-way repeated measurement ANOVA (1) and 2-way ANOVA (2) followed by the Tukey’s test (a=0.05). Significance effect on the residues percentage remaining for methods (p=0.044), for moments (p=0.006), for thirds repetition (p<0.001), and for interaction between methods and thirds (p<0.001), and moments and thirds (p=0.044). Significance effect on the apical displacement of root canal filing was detected for methods (p=0.008), however no difference was found between moments (p=0.617). In general, PSP using drill resulted in more homogeneous root canal preparation, mainly when made immediately. For all other combinations between methods and moments for PSP, the middle and apical thirds presented significant higher residues remaining. Thermo method performed in both moments and the drill method performed immediately had displacement in the apical direction, representing extrusion of the root filling material.

Abstract Objective: This study analyzed the effect of ionizing radiation on bone microarchitecture and biomechanical properties in the bone tissue surrounding a dental implant. Methodology: Twenty rabbits received three dental morse taper junction implants: one in the left tibia and two in the right tibia. The animals were randomized into two groups: the nonirradiated group (control group) and the irradiated group, which received 30 Gy in a single dose 2 weeks after the implant procedure. Four weeks after the implant procedure, the animals were sacrificed, and the implant/bone specimens were used for each experiment. The specimens (n=10) of the right tibia were examined by microcomputed tomography to measure the cortical volume (CtV, mm3), cortical thickness (CtTh, mm) and porosity (CtPo, %). The other specimens (n=10) were examined by dynamic indentation to measure the elastic modulus (E, GPa) and Vickers hardness (VHN, N/mm2) in the bone. The specimens of the left tibia (n=10) were subjected to pull-out tests to calculate the failure load (N), displacement (mm) up to the failure point and interface stiffness (N/mm). In the irradiated group, two measurements were performed: close, at 1 mm surrounding the implant surface, and distant, at 2.5 mm from the external limit of the first measurement. Data were analyzed using one-way ANOVA, Tukey’s test and Student’s t-test (α=0.05). Results: The irradiated bone closer to the implant surface had lower elastic modulus (E), Vickers hardness (VHN), Ct.Th, and Ct.V values and a higher Ct.Po value than the bone distant to the implant (P<0.04). The irradiated bone that was distant from the implant surface had lower E, VHN, and Ct.Th values and a higher Ct.Po value than the nonirradiated bone (P<0.04). The nonirradiated bone had higher failure loads, displacements and stiffness values than the irradiated bone (P<0.02). Conclusion: Ionizing radiation in dental implants resulted in negative effects on the microarchitecture and biomechanical properties of bone tissue, mainly near the surface of the implant.

Abstract Objective To evaluate the influence of three levels of dental structure loss on stress distribution and bite load in root canal-treated young molar teeth that were filled with bulk-fill resin composite, using finite element analysis (FEA) to predict clinical failure. Methodology Three first mandibular molars with extensive caries lesions were selected in teenager patients. The habitual occlusion bite force was measured using gnathodynamometer before and after endodontic/restoration procedures. The recorded bite forces were used as input for patient-specific FEA models, generated from cone-beam computed tomographic (CT) scans of the teeth before and after treatment. Loads were simulated using the contact loading of the antagonist molars selected based on the CT scans and clinical evaluation. Pre and post treatment bite forces (N) in the 3 patients were 30.1/136.6, 34.3/133.4, and 47.9/124.1. Results Bite force increased 260% (from 36.7±11.6 to 131.9±17.8 N) after endodontic and direct restoration. Before endodontic intervention, the stress concentration was located in coronal tooth structure; after rehabilitation, the stresses were located in root dentin, regardless of the level of tooth structure loss. The bite force used on molar teeth after pulp removal during endodontic treatment resulted in high stress concentrations in weakened tooth areas and at the furcation. Conclusion Extensive caries negatively affected the bite force. After pulp removal and endodontic treatment, stress and strain concentrations were higher in the weakened dental structure. Root canal treatment associated with direct resin composite restorative procedure could restore the stress-strain conditions in permanent young molar teeth.